Ultimaker S5 Pro Bundle

Main components:

  1. Glass door
  2. Print head
  3. Build plate
  4. Build plate clamps
  5. Touchscreen
  6. USB port
  7. Feeder 2
  8. Bowden tubes
  9. Feeder 1
  10. Power socket and switch
  11. Ethernet port
  12. Double spooler holder with NFC cable
  13. NFC socket


  • a build volume of 330 x 240 x 300 mm
  • xyz resolution: 6.9, 6.9, 2.5 micron
  • (20 micron layer resolution)
  • less than 24 mm^3/s build speed
  • (0.4 mm of nozzle diameter)
  • open filament system, compatible with glass and carbon fiber composites
  • print technology: Fused filament fabrication (FFF)


The Ultimaker S5 comes with two AA print cores and one BB print core. The AA print cores can be used for printing build materials and Breakaway support material. The BB print core can be used for water-soluble support material (PVA).

The Ultimaker S5 support all Ultimaker materials that are currently available, of which most can be printed with the 0.25, 0.4 and 0.8 mm print core sizes. The print core CC Red 0.6 can be used for third party composite materials.

Each material requires different settings for optimal results. If you use Ultimaker Cura to prepare your model, these settings are automatically set correctly if the correct print core(s) and material(s) are selected.

It is recommended to apply a thin layer of glue (using the glue stick from the accessory box) or an adhesion sheet to the glass build plate before starting a print. This will ensure that your print adheres reliably to the build plate, and also prevents the glass build plate from chipping when removing prints.