Skip to content

Quick AV Signal Flow with Lucidchart

By: Richard Mitchell

When collaborating on the design of classroom AV systems, having the ability to rapidly sketch, modify, innovate, and share a signal flow diagram is an invaluable tool in avoiding expensive mistakes before install. But, creating signal flow diagrams has traditionally been a challenge for AV technicians as the software is either expensive, overly complicated, or locks the AV technician in as the single point of modifications for all time.

First, what is a signal flow diagram, and why do I need it? A signal flow diagram shows the signal path (audio, video, network, control, etc.) from inputs to outputs, for the entire AV system. It’s essentially a blueprint for the system… and would you buy a house where they didn’t have a blueprint? With a signal flow diagram, most entry-level technicians should be able to diagnose an AV issue down to the cabling or hardware level. Without this diagram, it’s difficult to troubleshoot small systems, and nearly impossible with larger systems.

Over the past few weeks, we’ve been testing Lucidchart to see if it’s capable of eliminating some of the frustrations with other software-based signal flow products. First, Lucidchart is web-based, so it’s not a piece of software you need to download and manage. If you have a web browser, Windows, Mac, or Linux, you can work on your project from the office, at home, or on your vacation… because we all love working during our vacation.

The platform is easy enough for a novice user to pick up after watching a few 5-10 min. videos. But, the true power comes in the ability for the design to be shared. By pressing the Share button at the top, you can share your design with clients in a “read-only” mode, so they can see, but not modify, the design. But, you can also share the design with collaborators to speed up the process. Also, this ability to keep users up-to-date on the design means you aren’t sending PDFs of the drawings. If you’ve ever attempted to incorporate change requests from the initial release of a drawing when you’re already three or four versions ahead… you’ll understand the appeal of real-time environments.

The only negatives we see are that we are required to design our own AV hardware blocks. While this is somewhat time-consuming, once you create a block, you never need to re-create it.

Check out a quick design we created!

Leave a Reply

Your email address will not be published. Required fields are marked *